HP StorageWorks EML E-Series Drive Module Replacement Instructions (May 2005)

11
Verify that the FC port LED on the interface
controller card is solid green.
13
If necessary, upgrade the drive firmware using
the Interface Manager's Command Line Interface.
See the HP StorageWorks Interface Manager
and Command View TL User's Guide for detailed
procedures on upgrading drive firmware.
Note: A new drive will not be
recognized by the library until after a
reboot.
Getting help
• HP product information:
http://www.hp.com/products/tapestorage
• HP technical support and phone numbers:
http://www.hp.com/support
• HP StorageWorks Library and Tape Tools
(L&TT) diagnostic software:
http://www.hp.com/support/tapetools
• Interface Manager and HP StorageWorks
Command View TL:
http://www.hp.com/support/cvtl
12
Close the back
doors of the library.