HP StorageWorks EML E-Series Power Supply Base Unit Replacement Instructions (May 2005)

10
Connect the power cord to the rack power strip.
9
11
Close the back
doors of the library.
Power on the library, if the library was
powered off.
a. Set the rack power switch at the upper
right corner to the ON position.
b. Observe that all power indicators on the
power supplies show that power was
restored, the LED should be solid green.
Getting help
• HP product information:
http://www.hp.com/products/tapestorage
• HP technical support and phone numbers:
http://www.hp.com/support
• HP StorageWorks Library and Tape Tools
(L&TT) diagnostic software:
http://www.hp.com/support/tapetools
• Interface Manager and HP StorageWorks
Command View TL:
http://www.hp.com/support/cvtl