FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

F
FCFE.MIB
F-37
Fabric Element Management MIB
Description This object identifies the FxPort within the module. This number
ranges from 1 to the value of fcFeModulePortCapacity for the
associated module. The value remains constant for the identified
FxPort until the module is re-initialized.
Sequence
::= { fcFxPortC1AcctEntry 2 }
fcFxPortC1InConnections
SYNTAX Counter
Access read-only
Status mandatory
Description The number of Class 1 connections successfully established in which
the attached NxPort is the source of the connect-request.
Sequence
::= { fcFxPortC1AcctEntry 3 }
fcFxPortC1OutConnections
SYNTAX Counter
Access read-only
Status mandatory
Description The number of Class 1 connections successfully established in which
the attached NxPort is the destination of the connect-request.
Sequence
::= { fcFxPortC1AcctEntry 4 }
fcFxPortC1FbsyFrames
SYNTAX Counter
Access read-only
Status mandatory
Description The number of F_BSY frames generated by this FxPort against Class 1
connect-request.
Sequence
::= { fcFxPortC1AcctEntry 5 }