FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

E
Groups in MIB II
E-27
MIB II
ipRouteProto value. If this metric is not used, its value should be set
to -1.
Sequence
::= { ipRouteEntry 4 }
ipRouteMetric3
Syntax INTEGER
Access read-write
Status mandatory
Description An alternate routing metric for this route. The semantics of this
metric are determined by the routing-protocol specified in the route's
ipRouteProto value. If this metric is not used, its value should be set
to -1.
Sequence
::= { ipRouteEntry 5 }
ipRouteMetric4
Syntax INTEGER
Access read-write
Status mandatory
Description An alternate routing metric for this route. The semantics of this
metric are determined by the routing-protocol specified in the route's
ipRouteProto value. If this metric is not used, its value should be set
to -1.
Sequence
::= { ipRouteEntry 6 }
ipRouteNextHop
Syntax IpAddress
Access read-write
Status mandatory
Description The IP address of the next hop of this route. (In the case of a route
bound to an interface which is realized via a broadcast media, the
value of this field is the agent's IP address on that interface.)
Sequence
::= { ipRouteEntry 7 }