OS SNMP Support Manual (620-000131-620, April 2005)

SNMP Trap Registration Group

B-75

FC Management MIB

trapRegPort

Syntax INTEGER (1..2147483647)

Access read-only

Status mandatory

Description The UDP port to send traps to for this host. Normally this would be

the standard trap port (162). This object is an index and must be

specified to create a row in this table.

Sequence

::= { trapRegEntry 2 }

trapRegFilter

Syntax FcEventSeverity

Access read-write

Status mandatory

Description This value defines the trap severity filter for this trap host. The

connUnit will send traps to this host that have a severity level less

than or equal to this value. The default value of this object is

'warning'.

Sequence

::= { trapRegEntry 3}

trapRegRowState

Syntax INTEGER {

}

Access read-write

Status mandatory

Description Specifies the state of the row.

rowDestroy

READ: Can never happen.

WRITE: Remove this row from the table.

rowDestroy(1), Remove row from table.

rowInactive(2), Row exists, but TRAPs disabled

rowActive(3) Row exists and is enabled for sending traps