OS SNMP Support Manual (620-000131-620, April 2005)

Event Group

B-59

FC Management MIB

Status mandatory

Description Count of Class 2 Frames received at this port. Note, this is a Fibre

Channel only stat.

Sequence

::= { connUnitPortStatEntry 20 }

connUnitPortStatCountClass2TxFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of Class 2 Frames transmitted out this port. Note, this is a Fibre

Channel only stat.

Sequence

::= { connUnitPortStatEntry 21 }

connUnitPortStatCountClass2FBSYFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of times that FBSY was returned to this port as a result of a

Class 2 Frame that could not be delivered to the other end of the link.

This occurs if either the Fabric or the destination port is temporarily

busy. FBSY can only occur on SOFc1 frames (the frames that

establish a connection). Note, this is a Fibre Channel only stat.

Sequence

::= { connUnitPortStatEntry 22 }

connUnitPortStatCountClass2PBSYFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of times that PBSY was returned to this port as a result of a

Class 2 Frame that could not be delivered to the other end of the link.

This occurs if the destination N_Port is temporarily busy. PBSY can

only occur on SOFc1 frames (the frames that establish a connection).

Note, this is a Fibre Channel only stat.