OS SNMP Support Manual (620-000131-620, April 2005)

2-12

E/OS SNMP Support Manual

McDATA SNMP Support

FA MIB Sensor Trap

This trap is generated whenever a status change occurs for a fan or

power supply FRU. There is 1 variable binding.

FA MIB Port Status Change Trap

This trap occurs whenever a port status change occurs. There are 2

variable bindings.

Enterprise-specific Traps

fcEosPortScn

Type Number 1

Product Mapping Generated when Fibre Channel port operational state changes.

Trap Variables fcEosPortOpStatus

Binding OID Value

1 1.3.6.1.2.1.8888.1.1.5.1.3.<unit-id>.<sensor-index>

fcConnUnitSensorStatus.<unit-id>.<sensor-index>

Where unit-id is the WWN of the switch with 8 zeros appended for a

total length of 16. Example: 1.2.3.4.5.6.7.8.0.0.0.0.0.0.0.0

And where sensor-index refers to the FRU in the sensor table which

has changed state. For example if sensor-index was 5, then you could

look at the 5

entry in the sensor table to determine which FRU was

affected.

See description for

fcConnUnitSensorStatus

Binding OID Value

1 1.3.6.1.2.1.8888.1.1.6.1.6. <unit-id>.<port-index>

fcConnUnitPortStatus. <unit-id>.<port-index>

Where port-index is the port number normalized to the range 1-140.

See definition for fcConnUnitPortStatus.

2 1.3.6.1.2.1.8888.1.1.6.1.5. <unit-id>.<port-index>

fcConnUnitPortState. <unit-id>.<port-index>

Where port-index is the port number normalized to the range 1-140.

See definition for fcConnUnitPortState.