OS SNMP Support Manual (620-000131-620, April 2005)

Port Table

B-35

FC Management MIB

Sequence ::= { connUnitPortEntry 17 }

connUnitPortPhysicalNumber

Syntax INTEGER

Access read-only

Status mandatory

Description This is the internal port number this port is known by. In many

implementations, this should be the same as connUnitPortIndex.

Some implementations may have an internal port representation not

compatible with the rules for table indices. In that case, provide the

internal representation of this port in this object. This value may also

be used in the connUnitLinkPortNumberX or

connUnitLinkPortNumberY objects of the connUnitLinkTable.

Sequence

::= { connUnitPortEntry 18 }

connUnitPortStatObject

Syntax OBJECT IDENTIFIER

Access read-only

Status deprecated

Description This contains the OID of the first object of the table that contains the

statistics for this particular port. If this has a value of zero, then there

are no statistics available for this port. The port type information will

help identify the statistics objects that will be found in the table.

Sequence

::= { connUnitPortEntry 19 }

connUnitPortProtocolCap

Syntax OCTET STRING (SIZE (2))

Access read-only

Status mandatory

Description Bit mask that specifies the driver level protocol capability of this port.

If this is not applicable, return all bits set to zero.

The bits have the following definition:

unknown - 0