FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

B
Connectivity unit group
B-11
FC Management MIB
Access read-only
Status mandatory
Description Overall state of the connectivity unit.
Sequence
::= { connUnitEntry 5 }
connUnitStatus
Syntax INTEGER {
}
Access read-only
Status mandatory
Description Overall status of the connectivity unit. The goal of this object is to be
the single poll point to check the status of the connunit. If there is any
other component that has warning, then this should be set to
warning, etc.
Sequence
::= { connUnitEntry 6 }
connUnitProduct
Syntax DisplayString (SIZE (0..79))
Access read-only
Status mandatory
Description The connectivity unit vendor's product model name.
Sequence
::= { connUnitEntry 7 }
connUnitSn
Syntax DisplayString (SIZE (0..79))
Access read-only
unknown(1),
unused(2), cannot report status
ok(3), available for meaningful work
warning(4), something needs attention
failed(5) something has failed }