FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)
2
2-4
E/OS SNMP Support Manual
McDATA SNMP Support
Error status—Indicates one of a number of errors and error types.
Only the response operation sets this field. Other operations set this
field to zero.
Error index—Associates an error with a particular object instance.
Only the response operation sets this field. Other operations set this
field to zero.
Variable bindings—Serves as the data field of the SNMPv2 PDU.
Each variable binding associates a particular object instance with its
current value (with the exception of Get and GetNext requests, for
which the value is ignored).
Get, GetNext, Inform, Response, Set, and Trap PDUs Contain the
Same Fields:
[PDU type | Request ID | Error status | Error index | Object/Value
1 | Object/Value 2]
For the SNMPv2 trap pdu, the first and second variable bindings
contain the uptime and the trap OID respectively. Following the
uptime and trap OID are all the variable bindings specified in the
MIB for that particular trap.
E/OS Trap summary
table
This table shows the different kinds of traps supported by the switch
E/OS firmware.
All E/OS traps are SNMPv1 format, regardless of MIB definition syntax.)
Trap Severity Sent because MIB Trap OID E/OS EFCM
Generic Authentication
Failure
N/A SNMP request from
an invalid community
is received
RFC-1157 YES YES
Generic Link Up N/A RFC-1157 YES NO
Generic Warm Start N/A Software reset RFC-1157 YES NO
Generic Cold Start N/A Power up RFC-1157 YES NO
ES port change N/A A change in port
status
FCEOS 1.3.6.1.4.1.289.1 YES NO