OS SNMP Support Manual (620-000131-620, April 2005)

FA MIB

A-43

Fibre Alliance MIB

Description The IP port number for the agent. This is provided in case the agent is

at a non-standard SNMP port.

Sequence

::= { fcConnUnitLinkEntry 10 }

fcConnUnitLinkUnitTypeY

Syntax FcUnitType

Max-Access read-only

Status current

Description Type of the FC connectivity unit as defined in fcConnUnitType.

Sequence

::= { fcConnUnitLinkEntry 11 }

fcConnUnitLinkConnIdY

Syntax OCTET STRING (SIZE(3))

Max-Access read-only

Status current

Description This is the Fibre Channel ID of this port. If the connectivity unit is a

switch, this is expected to be a 24-bit Big Endian value. If this is loop,

then it is the ALPA that is connected. If this is an e-port, then it will

only contain the domain ID. If not any of those, unknown or cascaded

loop, return all bits set to 1.

Sequence

::= { fcConnUnitLinkEntry 12 }

There is one and only one statistics table for each individual port. For

all objects in statistics table, if the object is not supported by the conn

unit then the high order bit is set to 1 with all other bits set to zero.

The high order bit is reserved to indicate if the object if supported or

not. All objects start at a value of zero at hardware initialization and

continue incrementing till end of 63 bits and then wrap to zero.

Port Statistics

fcConnUnitPortStatTable

Syntax SEQUENCE OF FcConnUnitPortStatEntry

Max-Access not-accessible

Status current