FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

2
2-102
E/OS SNMP Support Manual
McDATA SNMP Support
Description URL to launch a management application, if applicable. Otherwise
empty string. In a standalone unit, this would be the same as the top
level URL. This has the same definition as systemURL for keywords.
FcConnUnitDomainId
Type OCTET STRING (SIZE (3))
Product Mapping FFCCXX
XX is the active domainId of the switch.
Access R
Description 24-bit Fibre Channel address ID of this connectivity unit. Following
the fibre channel standard, the right-most bit of the right-most octet is
for the least significant bit of the address value; the left-most bit of the
left-most octet, if needed, is for the most significant bit of the address
value. If this value is not applicable, all bits set to 1.
FcConnUnitProxyMaster
Type INTEGER
Product Mapping yes(3)
Access R
Description A value of ‘yes’ means this is the proxy master unit for a set of
managed units. For example, this could be the only unit with a
management card in it for a set of units. A standalone unit should
return ‘yes’ for this object. The values are defined as unknown (1), no
(2), yes (3).
FcConnUnitPrincipal
Type INTEGER
Access R
Description Whether this connectivity unit is the principal unit within the group
of fabric elements. If this value is not applicable, return unknown.
The values are defined as unknown (1), no (2), yes (3).
FcConnUnitNumSensors
Type Unsigned32