FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.switch.prefDomainId
99CLI Reference Guide for Directors and Edge Switches
Syntax
prefDomainId domainId
Purpose
This command sets the preferred domain ID for the switch.
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter:
Command Example
Root> config switch prefDomainId 1
config.switch.prefDomainId
domainId Specifies the new preferred domain ID value.
This parameter must be an integer in the range 1–31.