FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.switch.domainRSCN
95CLI Reference Guide for Directors and Edge Switches
Syntax
domainRSCN domainRSCNState
Purpose
This command sets the domain RSCN state for the switch. The switch can be
either offline or online when this command is executed.
Parameters
This command has one parameter:
Command Example
Root> config switch domainRSCN 1
config.switch.domainRSCN
domainRSCNState Specifies whether the domain RSCN state is
enabled. Valid values are enable and
disable. Boolean 1 and 0 may be substituted
as values.