FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.snmp.authTraps
89CLI Reference Guide for Directors and Edge Switches
Syntax
authTraps enabledState
Purpose
This command enables or disables the authorization traps to be sent to SNMP
management stations when unauthorized stations try to access SNMP information
from the director or edge switch.
Parameters
This command has one parameter:
Command Examples
Root> config snmp authTraps true
Root> config snmp authTraps 1
config.snmp.authTraps
enabledState Specifies whether the authorization traps are
enabled.
Valid values are true and false.
Boolean 1 and 0 may be substituted as values.