FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.security.switchBinding.setState
81CLI Reference Guide for Directors and Edge Switches
Syntax
setState switchBindingState
Purpose
This command sets the switch binding state on the switch.Parameters
This command has one parameter:
config.security.switchBinding.setState
switchBindingState Sets the switch binding state for the switch.
Valid values are:
disable — Disable switch binding.
Devices (servers, storage, and other
switches) are allowed to connect to the
switch without restrictions.
eRestrict — Enable switch binding and
restrict E_Port connections. E_Ports are
prevented from forming ISL connections
unless explicitly identified in the Switch
Membership List. F_Port connections are
allowed without restriction.
fRestrict — Enable switch binding and
restrict F_Port connections. Server and (or)
storage devices are prevented from forming
F_Port connections with the switch unless
explicitly identified in the Switch
Membership List. E_Ports are allowed to
form ISL connections without restriction.
allRestrict — Enable switch binding
and restrict E_Port and F_Port connections.
Both E_Ports and F_Ports prohibit
connections with all devices unless
explicitly identified in the Switch
Membership List.