FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
80 CLI Reference Guide for Directors and Edge Switches
Syntax
deleteMember wwn
Purpose
This command removes a member from the Switch Membership List. The user
cannot remove a member that is currently logged into the switch.
Parameters
This command has one parameter:
Command Examples
Root> config security switchBinding deleteMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.deleteMember
wwn Specifies the switch or N-Port device WWN of the
member to be removed from the Switch Membership
List. The value of the WWN must be in
colon-delimited hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00). The user may also
enter all for this argument to clear the Switch
Membership List completely. Note that the user cannot
clear a WWN that is currently logged into the switch.