FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.port.type
61CLI Reference Guide for Directors and Edge Switches
config.security.fabricBinding Commands
The config.security.fabricBinding commands function in a different
way from most CLI commands, which are single action commands that take effect
immediately. The first Fabric Binding command entered invokes a work-area
editor. The commands take effect on a temporary copy of a Fabric Membership
List in the work area until the temporary copy in the work area is activated to the
fabric — or is discarded.
Because not all the verification of the Fabric Membership List can occur on the
temporary copy in the work area, it is possible, however unlikely, that the copy of
the list encounters no errors until the list is activated to the fabric.
These commands include the following:
■ config.security.fabricBinding.activatePending
■ config.security.fabricBinding.addMember
■ config.security.fabricBinding.clearMemList
■ config.security.fabricBinding.deleteMember
■ config.security.fabricBinding.replacePending
■ config.security.fabricBinding.setState
■ config.security.fabricBinding.showActive
■ config.security.fabricBinding.showPending