FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
56 CLI Reference Guide for Directors and Edge Switches
Output Example
The output from the config.port.show command displays as follows.
Port Number: 4
Name: HP4 tape drive
Blocked: false
Extended distance: false
Type: F Port
Speed: 2 Gb/sec
Extended
Distance
The extended distance configuration state.
Valid values are true and false. This field is not valid
for the Edge Switch 2/24.
FAN The fabric address notification (FAN) state. Valid values
are true and false. (Edge Switch 2/24 only.)
Type The port type.
Valid values are F Port, E Port, G Port, Fx Port
(Edge Switch 2/24 only), and Gx Port (Edge Switch 2/24
only).
Speed The port speed. Valid values are 1 Gb/sec, 2 Gb/sec,
and Negotiate.