FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.port.show
55CLI Reference Guide for Directors and Edge Switches
Syntax
show portNumber
Purpose
This command displays the port configuration for a single port.
Description
This show command, on the config.port branch, displays the current
configuration for the specified port.
Parameters
This command has one parameter:
Command Example
Root> config port show 4
Output
The port configuration is displayed as a table that includes the following
properties:
config.port.show
portNumber Specifies the port number. Valid values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
Port Number The port number.
Name The port name.
Blocked The blocked state.
Valid values are true and false.