FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.port.fan
53CLI Reference Guide for Directors and Edge Switches
Syntax
fan portNumber fanOn
Purpose
This command sets the fabric address notification (FAN) state for a port (Edge
Switch 2/24 only). This configuration can be applied to any port regardless of its
current configuration. The FAN value is applied at the time the port is configured
and operated in a loop.
Parameters
This command has two required parameters:
Command Examples
Root> config port fan 4 1
config.port.fan
portNumber Specifies the port number. Valid values are:
0–23 for the Edge Switch 2/24
fanOn Specifies the FAN state for the port. Valid
values are true and false.
Boolean 1 and 0 may be substituted as values.