FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
50 CLI Reference Guide for Directors and Edge Switches
Syntax
setState osmsState
Purpose
This command sets the enabled state of the Open Systems Management Server.
The Open Systems Management Server feature key must be installed in order to
enable the OSMS State.
Parameters
This command has one parameter:
Command Example
Root> config OpenSysMS setState 1
Note: This command has functionality that is identical to the
config.features.OpenSysMS command, described on page 43.
config.openSysMS.setState
osmsState Specifies whether the Open Systems
Management Server is enabled. Valid values are
enable and disable. Boolean 1 and 0 may
be substituted as values.