FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.features.show
45CLI Reference Guide for Directors and Edge Switches
Syntax
show
Purpose
This command shows the product feature information configured for this switch.
This command provides the same output as the command show.features on
page 177.
Parameters
This command has no parameters.
Command Example
Root> config features show
Output
The product feature data is displayed as a table that includes the following
properties:
config.features.show
Installed Feature
Set
The feature set installed using a feature key.
Only installed keys are displayed.
Feature Individual features within each set. In many
cases, there is only one feature within each
feature set.
State The state of the individual feature. Fabric-wide
features are displayed as Active/Inactive.
switch-centric features are displayed as
Enabled/Disabled.