FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)
CLI Commands
44 CLI Reference Guide for Directors and Edge Switches
Syntax
opentrunking openTrunkingState
Purpose
This command sets the enabled state of the OpenTrunking feature. The
OpenTrunking feature key must be installed in order to enable open trunking.
Parameters
This command has one parameter:
Command Example
Root> config features opentrunking 1
Note: This command has functionality that is identical to the perf.opentrunking.setState
command, described on page 154.
config.features.opentrunking
openTrunkingState This parameter can be set to enable or
disable the OpenTrunking feature. Boolean
1 and 0 may be substituted as values.