FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)
CLI Commands
40 CLI Reference Guide for Directors and Edge Switches
Syntax
enterpriseFabMode enterpriseFabModeState
Purpose
This command sets the Enterprise Fabric mode state for the fabric. The
SANtegrity feature key must be installed to activate the Enterprise Fabric mode
state.
Parameters
This command has one parameter:
Command Example
Root> config features enterpriseFabMode 1
Note: This command has functionality that is identical to the
config.enterpriseFabMode.setState command, described on page 39.
config.features.enterpriseFabMode
enterpriseFabModeState Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.