FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.enterpriseFabMode.setState
39CLI Reference Guide for Directors and Edge Switches
Syntax
setState enterpriseFabModeState
Purpose
This command sets the Enterprise Fabric Mode state for the fabric. The
SANtegrity feature key must be installed to activate the Enterprise Fabric Mode
state.
Parameters
This command has one parameter:
Command Example
Root> config enterpriseFabMode setState 1
Note: The command config.features.enterpriseFabMode on page 40 has functionality
that is identical to this command.
config.enterpriseFabMode.setState
enterpriseFabModeState Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.