FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Introduction
30 CLI Reference Guide for Directors and Edge Switches
Syntax
logout
Purpose
This command allows a Telnet client to disconnect from a director or edge switch.
Description
This command logs out the single Telnet client connected to a director or edge
switch. This command can be entered at any point in the command tree.
Parameters
This command has no parameters.
Command Examples
Root> logout
Config> logout
Config.Port> logout
logout