FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Error Messages
243CLI Reference Guide for Directors and Edge Switches
Error 251: The threshold
alert must be disabled
The counter threshold
alert to be
modified/deleted is
already enabled.
Disable the threshold alert
and then try the
command again.
Error 252: Not Allowed
While the Pending Fabric
Binding State is Set to
Inactive
The pending fabric
binding set must be set to
Restrict in order to
edit the pending Fabric
Binding List.
Set the pending fabric
binding state to
Restrict.
Error 253: Cannot
Remove a Member
Currently Interacting with
the Fabric
Current members of the
fabric must be included in
the Fabric Binding List.
Do not remove active
fabric members from the
pending Fabric Binding
List.
Table 5: CLI Error Messages (Continued)
Message Description Action