FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Error Messages
233CLI Reference Guide for Directors and Edge Switches
Error 146: Fabric Binding
May Not Be Deactivated
While Enterprise Fabric
Mode Active
The user attempted to
deactivate fabric binding
while Enterprise Fabric
mode was active.
Fabric binding must be
active while operating in
Enterprise Fabric mode.
The fabric binding state
may be changed if
Enterprise Fabric mode is
deactivated. It should be
noted, however, that this
can be disruptive to the
fabric.
Error 148: Not Allowed
While Switch Offline
The switch must be online
to complete this request.
Change the state of the
switch to ONLINE and
re-submit the request.
Error 149: Not Allowed
While Enterprise Fabric
Mode Enabled and
Switch Active
The request cannot be
completed while the
switch is online and
Enterprise Fabric mode is
Active.
This operation will be
valid if the switch state is
set to OFFLINE and
Enterprise Fabric mode to
inactive. It should be
noted, however, that this
can be disruptive to the
fabric.
Error 151: Invalid Open
Systems Management
Server State
The request cannot be
completed because the
OSMS state submitted is
invalid.
The OSMS state may be
set to either enable or
disable. For more
information, see
config.features.OpenSys
MS on page 43.
Error 152: Invalid FICON
Management Server State
The request cannot be
completed because the
FICON MS state
submitted is invalid.
The FICON MS state may
be set to either enable
or disable. For more
information, see
config.features.ficonms on
page 41.
Error 153: Feature Key
Not Installed
The request cannot be
completed because the
required feature key has
not been installed to the
firmware.
Contact your sales
representative.
Table 5: CLI Error Messages (Continued)
Message Description Action