FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
216 CLI Reference Guide for Directors and Edge Switches
Output Example
The output from the show.thresholdAlerts.log command displays as
follows.
Date/Time Name Port Type Value Int
---------------- ------------- ----- ----------------- ----- ---
05/26/02 10:58A CTA Alert #4 2 Cls3 DiscardFrms 250 10
05/24/02 12:01A CTA Alert #4 2 Cls3 DiscardFrms 250 10
05/22/02 10:58A My test CTA 43 CRC Errors 35 30
05/20/02 08:01P TTA Test #3 2 Tx Util 85 120
03/01/02 02:58A CTA Alert #1 130 CRC Errors 100 60
Link Resets Received CTA - Link Resets Received
OLS Sent CTA - OLS Sent
OLS Received CTA - OLS Received
Link Failures CTA - Link Failures
Sync Losses CTA - Sync Losses
Signal Losses CTA - Signal Losses
Protocol Errors CTA - Primitive Sequence
Errors/Protocol Errors
Invalid Tx Words CTA - Invalid Tx Words
CRC Errors CTA - CRC Errors
Discarded Frames CTA - Discarded Frames
Frames Too Short CTA - Frames Too Short
Delimiter Errors CTA - Delimiter Errors
Address ID Errors CTA - Address ID Errors
Cls2 BusiedFrms CTA - Class 2 Busied Frames
Cls2 RejectedFrms CTA - Class 2 Rejected Frames
Cls3 DiscardFrms CTA - Class 3 Discarded
Frames
Phys Lnk Err Set CTA - Physical Link Errors
Summed Set
Value The increment or utilization value of the alert.
Interval The time interval of the alert.