FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
204 CLI Reference Guide for Directors and Edge Switches
Syntax
fabricBinding
Purpose
This command displays the fabric binding configuration saved on the fabric. The
command performs the same function as
config.security.fabricBinding.showActive command.
Parameters
This command has no parameters.
Command Example
Root> show security fabricBinding
Output
The fabric binding configuration data is displayed as a table that includes the
following properties:
Output Example
The output from the show.security.fabricBinding command displays
as follows:
Fabric Binding State: Active Restricting
Domain 1 (00:11:22:33:44:55:66:77
Domain 2 (88:99:AA:BB:CC:DD:EE:FF
Domain 14 (11:55:35:45:24:78:98:FA)
show.security.fabricBinding
Fabric Binding State The active fabric binding state: Inactive
or Active Restricting
Fabric Membership List The active Fabric Membership List.