FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
196 CLI Reference Guide for Directors and Edge Switches
Syntax
nodes portNumber
Purpose
This command displays the loop node list for a specified port. This command is
valid only on the Edge Switch 2/24.
Parameters
This command has one parameter:
Command Example
Root> show port nodes portNumber
Output
The port data is displayed as a table that includes the following properties:
show.port.nodes
portNumber Specifies the port number.
Valid values are:
0–23 for the Edge Switch 2/24
PC Addr The Fibre Channel address of nodes attached to this
port. Private devices are assigned address strings of
0000 followed by the two-digit hexadecimal
Arbitrated Loop Physical Address (ALPA), instead
of the 6-digit hexadecimal number presented for
public devices.
Attached WWN The WWN of nodes attached to this port, or the
string NOT LOGGED IN for a private loop device.
Class The Class value for public devices. This field is left
blank for private devices.
Data Field Size The Data Field Size value for public devices. This
field is left blank for private devices.