FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

show.eventLog
175CLI Reference Guide for Directors and Edge Switches
Syntax
eventLog [clear]
Purpose
This command shows the contents of the event log as maintained in NVRAM on
the director or edge switch.
Parameters
This command has one parameter:
Command Example
Root> show eventLog
Output
The event log data are displayed as a table that includes the following properties:
show.eventLog
clear This optional parameter causes all reroute log entries to
be cleared.
Date/Time The date and time when the event occurred.
Code The event reason code.
Severity The severity of the event. The values are:
Major — Unit operational (major failure).
Minor — Unit operational (minor failure).
Severe — Unit not operational.
The causes are either the switch contains no operational
SBAR cards or the system shuts down due to CTP thermal
threshold violations.
Info — Unit operational (information only).