FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

perf.thresholdAlerts.counter.addPort
163CLI Reference Guide for Directors and Edge Switches
Command Example
Root> perf thresholdAlerts counter addPort checklinks 12
portNumber Specifies the port number or port type. Valid values are
either a single port number, all ports, or port type. The
following port numbers are valid:
0–15 for the Edge Switch 2/16
0-23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
all applies the congestionThreshold value to every
port on the product.
Specifying a port type removes all the ports from the alert
and applies the alert to each port that is the specified type of
port. Valid values are:
■ eport
■ fport
■ flport (Edge Switch 2/24 only)
A counter threshold alert is not allowed to specify both port
types and individual port numbers.