FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
154 CLI Reference Guide for Directors and Edge Switches
Syntax
setState openTrunkingState
Purpose
This command sets the enabled state of the OpenTrunking feature. The
OpenTrunking feature key must be installed in order to enable open trunking.
Parameters
This command has one parameter.
Command Example
Root> perf opentrunking setState 1
Note: This command has functionality that is identical to the
config.features.opentrunking command, described on page 44.
perf.opentrunking.setState
openTrunkingState This parameter can be set to enable or disable
the OpenTrunking feature. Boolean 1 and 0 may be
substituted as values.