FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.zoning.showPending
131CLI Reference Guide for Directors and Edge Switches
Syntax
showPending
Purpose
This command shows the zoning configuration in the work area of the zone set
that has not yet been activated.
Parameters
This command has no parameters.
Command Example
Root> config zoning showPending
Output
The zoning configuration data is displayed as a table that includes the following
properties:
Output Example
The output from the config.zoning.showPending command displays as
follows.
Pending Zone Set
Default Zone Enabled: False
ZoneSet: TheNewUltimateZoneSet
Zone: TheNewUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
Zone: TheNewNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone: TheNewNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
config.zoning.showPending
Local ZoneSet The enabled status, name, and member zones of the
zone set.