FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
124 CLI Reference Guide for Directors and Edge Switches
Syntax
addWwnMem “zoneName” wwn
Purpose
This command adds a World Wide Name zone member to the specified zone in
the work area.
Description
A product can have a maximum of 1024 zone members in its zones.
Parameters
This command has two parameters:
Command Example
Root> config zoning addWwnMem TheUltimateZone
10:00:00:00:C9:22:9B:64
config.zoning.addWwnMem
zoneName Specifies the name of the zone.
wwn The World Wide Name of the member to be added to
the zone.
The value of the WWN must be in colon-delimited
hexadecimal notation.
For example: AA:00:AA:00:AA:00:AA:00.