FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
122 CLI Reference Guide for Directors and Edge Switches
Syntax
deleteZone “zoneName”
Purpose
This command deletes a zone from the zone set in the work area.
Description
Changes are not activated on the switch until the
config.zoning.activeZoneSet command is issued.
Parameters
This command has one parameter:
Command Example
Root> config zoning deleteZone TheLeastUltimateZone
config.zoning.deleteZone
zoneName Specifies the name of the zone to be deleted.