FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
108 CLI Reference Guide for Directors and Edge Switches
Syntax
zoningRSCN zoningRSCNState
Purpose
This command sets the zoning RSCN state for the switch. The switch can be
either offline or online when this command is executed.
Parameters
This command has one parameter:
Command Example
Root> config switch zoningRSCN 1
config.switch.zoningRSCN
zoningRSCNState Specifies whether the zoning RSCN state is
enabled. Valid values are enable and
disable. Boolean 1 and 0 may be
substituted as values.