HP StorageWorks X5500 Network Storage Gateway for Linux setup guide (AP811-96003, October 2009)

External network port numbers
The following port numbers are used for external connections to HP X5500 Storage Gateway for
Linux. If HP X5500 Storage Gateway for Linux is behind a firewall, it may be necessary to change
the firewall rules to allow traffic on these ports.
DescriptionTransport TypePort
HTTPS connection from the HP X5500 Storage Gateway for Linux Man-
agement Console
TCP6771
Array Configuration UtilityTCP2301
Array Configuration UtilityUDP2301
Array Configuration UtilityTCP2381
Array Configuration UtilityUDP2381
Internal network port numbers
The following network port numbers are used for internal, server-to-server communication. Should you
have HP X5500 Storage Gateway for Linux nodes firewalled from each other, you will need to
configure the firewall to allow communication on these ports. Although these port numbers should not
conflict with any registered service, they can easily be reconfigured as described under “Change
configurable port numbers” in the HP StorageWorks X5500 Network Storage Gateway for Linux File
Serving Software administration guide.
DescriptionTransport TypePort
Group Communications client connectionsTCP7659
Group Communications multicast and unicast messagesUDP7659
Group Communications control tokenUDP7660
Group Communications administration and statisticsUDP7661
PerfmonTCP, UDP8649
PerfmonTCP, UDP8651
PerfmonTCP, UDP8652
PanPulse network health detectorUDP8940
HP X5500 Storage Gateway for Linux Management ConsoleTCP9050
DLM control and statistics connectionsTCP9060
DLM point-to-point messagesUDP9060
MSM control and statistics connectionsTCP9065
MSM point-to-point messagesUDP9065
Set up HP X5500 Storage Gateway for Linux solutions36