HP StorageWorks X5500 Network Storage Gateway for Linux setup guide (AP811-96003, October 2009)

NOTE:
It is important to configure the software so it does not use the public network connections for intra-cluster
network traffic. See 9. Configure HP X5500 Storage Gateway for Linux for public versus private
network for details.
iLO card network connections
The DL360 servers include a built-in remote management card called the Integrated Lights Out (iLO)
card. The iLO plays an integral part in the HP X5500 Storage Gateway for Linux solution. It is used
to restart a server in the cluster if the server is not adhering to the rules of cluster membership. The
iLO card has a network connection. All iLO interfaces should be part of the same intra-cluster network
described above.
Cluster SAN configuration guidelines
See Cluster SAN configuration guidelines on page 6 for more information.
HP StorageWorks X5500 Network Storage Gateway for Linux setup guide 11