HP StorageWorks Clustered Gateway (server/software bundle) 3.6.1 Windows Storage Server Edition upgrade guide (AG515-96012, September 2008)

Chapter 2: Upgrade procedure 13
Performance dashboard
The HP Clustered File System 3.6.1 has an additional utility, Performance
Dashboard, that gets installed during the upgrade. Performance
Dashboard provides performance information for the cluster, individual
servers, and PSFS filesystems. See the HP StorageWorks Clustered File
System 3.6.1 administration guide for details about how to use this
performance monitoring utility.
Changes Necessitated by the Upgrade
After upgrading to the HP Clustered File System 3.6.1 release, you may
need to make the following changes to your configuration:
• “Upgrade Filesystems for Alternate Data Streams (ADS)” (all
upgrades)
• “Upgrade Filesystems for 8.3 SFN Support If Needed” (only if 8.3
support is needed)
• “Replace Membership Partitions That Are Too Small” (3.4 upgrades
only)
• “Re-create Concatenated Dynamic Volumes” (3.4 upgrades only)
• “Remove Custom Setting for GcTrimLevel” (3.4 upgrades only)
• “Re-create Notifiers” (3.4 upgrades only)
• “Upgrade the HP CFS Management Console on Clients” (3.4
upgrades only)
Upgrade Filesystems for Alternate Data Streams
(ADS)
HP Clustered File System 3.6.1 provides filesystem support for ADS. This
support is enabled by default in PSFS filesystems created on HP Clustered
File System 3.6.1. PSFS filesystems created on HP Clustered File System
3.6.0 or earlier releases must be upgraded to enable ADS support. When
ADS support is enabled on a filesystem, it cannot be later disabled.