HP StorageWorks Clustered Gateway (server/software bundle) 3.6.0 Windows Storage Server Edition Upgrade Guide (5697-7456, April 2008)

Chapter 2: Upgrade procedure 12
If three membership partitions are configured, the replacements can be
done one-at-a-time while the cluster is online. If only one membership
partition is configured, the cluster must be offline when the partition is
replaced. See "Manage Membership Partitions" in the HP StorageWorks
Clustered File System Administration Guide for more information.
Re-create Notifiers
If you previously used notifier scripts, you will need to re-create the
notifiers. HP Clustered File System 3.6 provides three event notifier
services:
• SNMP Notifier Service—This service sends SNMP notifications, or
traps, to the configured SNMP targets when the selected events occur.
• Email Notifier Service—This service sends email to specified
addresses when the selected events occur.
• Script Notifier Service—This service allows you to specify a script
that will be triggered when selected events occur. This method works
in the same way as the notifiers provided with previous HP Clustered
File System releases; however, you can specify only one notifier script.
For information about configuring the notifier services, see "Configure
Notifiers and View Events" in the HP StorageWorks Clustered File
System Administration Guide.
Re-create Concatenated Dynamic Volumes
After the upgrade to HP Clustered File System 3.6.0, you will see alerts
such as the following for each concatenated dynamic volume:
DynvolWarn: psvXX has old device format and should be
manually upgraded.
Until these dynamic volumes are re-created, you will not be able to use
the new volume disaster recovery feature. You can continue to use
concatenation when you re-create the volume.