HP StorageWorks Clustered Gateway 3.6.0 Windows Storage Server Edition Event Notification Guide (5697-7151, January 2008)

Chapter 3: Event Messages 36
17007 This cluster unable to take control of SAN, because the servers are unable to
write to a majority of the membership partitions, possibly due to a SAN
hardware failure or misconfiguration and/or because some servers have
been excluded from the SAN. As a result, some or all filesystem operations
may be paused throughout the cluster. In addition, filesystem mounts and
unmounts and disk imports and deports cannot be performed.
Action. Check the cluster configuration and add the server if it is not
currently a member. Also ensure that the server can access the membership
partitions and has write access to them, and check for any SAN hardware
problems.
17008 This cluster takes control of SAN failure resolved.
Action. None. Alert 17007 is resolved.
17009 This cluster unable to take control of SAN, because a majority of the
membership partitions cannot be written or are corrupt, possibly due to a
SAN hardware failure or misconfiguration and/or because servers have
been excluded from the SAN. As a result, some or all filesystem operations
may be paused throughout the cluster. In addition, filesystem mounts and
unmounts and disk imports and deports cannot be performed.
Action. Ensure that all servers can access the membership partitions and
have write access to them. If a membership partition is corrupt, another alert
will specify its location. See “Membership Partitions” in the HP StorageWorks
Clustered File System Administration Guide for corrective actions.
17010 This cluster takes control of SAN failure resolved.
Action. None. Alert 17009 is resolved.
17011 Singleton cluster unable to take control of SAN. Possibly this server has not
been added to the cluster or has been deleted from the cluster, or possibly a
network failure has partitioned this server from the rest of the cluster. As a
result, some or all filesystem operations may be paused throughout the
cluster. In addition, filesystem mounts and unmounts and disk imports and
deports cannot be performed.
Action. Check the cluster configuration and add the server if it is not
currently a member. Also check the network connections and configuration
for the server to ensure that it can communicate with the rest of the cluster.
17012 Singleton cluster takes control of SAN failure resolved.
Action. None. Alert 17011 is resolved.
ID Message and Corrective Action