HP StorageWorks Clustered File System 3.6.1 Windows Storage Server Edition administration guide (AG515 - 96007, August 2008)

Chapter 4: Cluster Administration 38
View Installed Software
The Installed Software window lists the operating system and HP
software that are currently installed on each server in the cluster. To see
this window, select Help > Installed Software.
Use the following command at the Command Prompt to see the software
installed on specific servers:
mx server listsoftware <server>
If the operating system uses the 64-bit architecture, x64 will be specified
in the output. Otherwise, the architecture is assumed to be 32-bit.
Start or Stop HP Clustered File System
By default, HP Clustered File System (the matrixserver service) starts
automatically when the system is booted. This feature is controlled by the
Startup dialog. If you do not want HP Clustered File System to start when
the system is booted, use one of these methods to disable the service:
• Open the Startup dialog and change the service from Automatic to
Disabled.
•Run the sc config matrixserver start= disabled command.