HP StorageWorks Clustered File System 3.6.1 Windows Storage Server Edition administration guide (AG515 - 96007, August 2008)

Chapter 4: Cluster Administration 37
%SystemDrive%\Program Files\Hewlett-Packard\HP Clustered File
System\lib
• An SNMP event notifier service that can send HP Clustered File
System events as SNMP traps.
To enable the HP Clustered File System SNMP extension agent, the
Microsoft SNMP service must be installed and configured on all nodes in
the cluster. This service is included in the Microsoft Windows 2003
distribution; however, it is not automatically installed. To perform the
installation, complete these steps:
1. Open the Control Panel and select Add or Remove Programs.
2. Double-click Add/Remove Windows Components. On the Windows
Components Wizard, select Management and Monitoring Tools and
click Details.
3. On the Management and Monitoring window, select Simple Network
Management Protocol and click OK and then click Next on the
following window.
4. Insert the Windows 2003 CD or specify the location of the files. The
Wizard will now install the software.
After the Microsoft SNMP service is installed, you will need to specify a
community string. The public community string is adequate, as the string
is used only for read-only operations. To add a community string,
complete the following steps.
1. Open the Control Panel and select Administrative Tools.
2. Double-click Services. On the Services window, locate the SNMP
Service, right-click, and select Properties.
3. Open the Security tab and add the community name.
The Microsoft SNMP service is enabled by default and will automatically
use the HP Clustered File System extension agent.