HP StorageWorks Clustered File System 3.6.1 Windows Storage Server Edition administration guide (AG515 - 96007, August 2008)

3
2
Quick Start Checklist
The following checklist is intended for new installations of HP Clustered
File System and includes typical steps to configure the cluster.
Cluster Configuration Steps
The following checklist assumes that the installation and configuration
steps described in the HP StorageWorks Clustered File System Setup Guide
have been completed
.
Action Description
Review
administrative
considerations and
restrictions.
The considerations and restrictions describe best
practices and requirements for using HP Clustered
File System. See “Administrative Considerations
and Restrictions” on page 18.

Set up administrative networks for HP Clustered File System
Configure network
interfaces.
Specify the networks that you prefer to use for HP
Clustered File System administrative traffic. You
can also disable interfaces for virtual hosts. See
“Configure Network Interfaces” on page 57.

Prepare PSFS filesystems
Import disks into the
cluster.
The disks to be used for PSFS filesystems must be
imported to enable the cluster to control access to
them. See “Import SAN Disks” on page 67.
