HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

AppendixA:ConfiguretheClusterfromtheCommandLine 57
ThedefaultSNMPcommunitystringforHPClusteredFileSystemis
private.Ifyouwanttouseacustomcommunitystring,includethe‐‐
community<string>option.TheSNMPcommunitystringmustbeset
tothesamevalueonHPClusteredFileSystemandtheSANswitches.
mx config fcfencing
WithFibreChannelswitch‐basedfencing,whenaserverneedstobe
fenced,HPClusteredFileSystemwilldisabletheserver’saccessinthe
FibreChannelfabric.Theservermustberebootedtoregainaccessto
theSAN.
mx config mp set <uuid1/partno> [<uuid2/partno> <uuid3/partno>]
HPClusteredFileSystemusesasetofmembershippartitionsto
controlaccesstotheSANandtostorethedevicenamingdatabase,
whichincludestheglobaldevicenamesthatHPClusteredFileSystem
assignstotheSANdisksplacedunderitscontrol.Specifyeitheroneor
threeLUNsordisk
partitionsbetousedasmembershippartitions.
Notethefollowing:
–LUNsmustalreadybepartitionedasdescribedinstep“11.Create
LUNsfortheMembershipPartitionsandModifyPartitionTables”
onpage18.
–Existingpartitionsusedformembershippartitionscannotcontain
Windowsfilesystems.See“PartitionsContainingWindows
Filesystems”onpage20.
–Theminimumsizeforamembershippartitionis1GB.
mx server add <node>
Addthespecifiednodetothecluster.
mx server start <node>
StartHPClusteredFileSystemonthespecified node.
mx config description <description>
TheclusternameordescriptionappearsonthetitlebaroftheHP
ManagementConsole.Thenameordescriptioncancontainupto80
characters.