HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

Chapter6:OtherProcedures 51
NOTE: Thisproceduredoesnotrequireanydowntime.Repeatthis
procedureoneachserverinthecluster.
Upgrade One Server and Export
ThisprocedurerequiresthatHPClusteredFileSystembestoppedonall
servers.Executetheprocedureononeserverinthecluster.
1. Ononeserver,selectStart>Programs>HPClusteredFileSystem>
ManagementConsole.OntheConnectionParameterswindowthat
opensnext,entertheIPaddressofthe
server,typetheuserand
password,andthenclicktheConfigurebutton.
NOTE: Ifthereisa.matrixrcfileonthesystemrunningmxconsole,
youwillseeaDisconnectdialoginsteadoftheConnection
Parameterswindow.Select“Logontoanotherclusterserver”
andthenclickConfigure.
2. SelecttheClusterWideConfigurationtab,andthenstoptheservice 
onallnodes.
3. ReturntotheGeneral
Settingstaband selectChangeLicenseFile.
4. Typethepathtothenewlicensefileorbrowsetoit.
5. ClickApply.
6. Starttheclusterservicewhenprompted.(Thisstartstheserviceonthe
connectednode.)
7. Exporttheconfigurationtoallotherservers.
8. StarttheHPClusteredFileSystemserviceon
allothernodes.