HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

45
6
Other Procedures
Thischapterdescribeshowtoperformthefollowingprocedures:
• ConfiguretheXIOtechMAGNITUDEStorage Array
•Addanewservertoacluster.
•Moveaserverfromoneclustertoanother.
•UpgradetheHPClusteredFileSystemlicensefile.
Hewlett‐PackardsupportsClusteredFileSystemwithahostofstorage
arraysfromvariousvendors;
however,XIOtechMAGNITUDEstorage
arrayneedsafewvariationsdescribedbelow.
Configure the XIOtech MAGNITUDE
Storage Array
ConfiguretheXIOtechMAGNITUDEstoragearraybeforeyouinstallHP
ClusteredFileSystem.
ThisstoragearraysupportsasecureLUNmaskingcapability.Thereare
twoprimarymodesofoperation:NoMapping/MaskingandNewServer
SeeNothing.Theconfigurationyouwillneedtoperformde pendson
whichmodeyouare using.
“No Mapping/Masking” Mode
AllserversthatcantargettheMAGNITUDEdevicecanalsoseeallofthe
LUNsonthedevice.HPClusteredFileSystemcanbeinstallednormally